DIY Home Repair Infographic with 7 Safety Steps and Tools

Numbered steps infographic titled "Install Dimmer Switch". 7 numbered step cards in sequence, clean technical instructional illustration, warm earth workshop palette, vertical layout. Each card shows anatomically correct hand positions, realistic tools and parts, clear action visual, short heading IN English, one-line caption IN English. Include safety-conscious warning callouts for electrical work, including "Shut off power before starting" and verify power is off with a tester; subtle pro-advice callout that this is advanced and to call a licensed electrician if unsure. Step 1: turn off breaker at electrical panel and place warning tag. Step 2: test existing wall switch for no voltage using a non-contact tester. Step 3: remove faceplate and unscrew switch from electrical box. Step 4: document and label wires, showing line, load, ground, neutral if required by the dimmer. Step 5: disconnect old switch and connect dimmer leads/wires with wire nuts according to wiring diagram, grounding clearly shown. Step 6: mount dimmer into box, install faceplate, align neatly. Step 7: restore power and test dimming function with compatible light bulb. Add a small side panel with required tools and materials: screwdriver, voltage tester, wire strippers, wire nuts, dimmer switch, electrical tape. Add a compatibility note visual for LED/CFL/incandescent bulb compatibility and neutral-required models. No plumbing visuals, but keep general safety style consistent. Do not render the target search intent phrase as on-image text; only reflect the selected topic visually. All text MUST be written in English (array). Every heading, label, caption, legend and metric name in the image must be in English — not English. Spell each English word correctly using English characters and diacritics. Numbers stay as digits, no graphic gore, no watermarks Safety-conscious — include "shut off power / water before X" callouts for electrical / plumbing. Anatomically correct hand positions.