Dovetail Wood Joint Step-by-Step DIY Infographic

Craft / DIY infographic titled "Dovetail Wood Joint Step-by-Step". WOOD JOINT TYPES catalog presented as a technique-focused step-by-step instructional layout for an advanced maker. Minimal flat craft-magazine illustration style, warm craft natural palette, clean editorial composition, anatomically correct hand positions, no tool brand logos. Show 6 numbered visual steps with a clear technique diagram in each panel, short heading IN English, one-line caption IN English, and small tool icons.

Step 1: Mark the tails — diagram of a woodworker marking dovetail tail angles on the end grain and face of a board with marking gauge, square, pencil, bevel gauge. Caption explains precise layout for advanced dovetail spacing.
Step 2: Saw the tails — diagram of a backsaw cutting just to the waste side of the marked tail lines, hands positioned safely and correctly. Caption explains accurate angled cuts.
Step 3: Remove tail waste — diagram of coping saw and sharp chisel removing the waste between tails, with bench support. Caption explains clean waste removal to the baseline.
Step 4: Transfer tails to pin board — diagram of tail board aligned onto pin board, marking knife transferring the exact tail profile. Caption explains precise transfer for tight fit.
Step 5: Saw and chop the pins — diagram of backsaw cutting pin lines and chisel clearing pin waste, showing advanced precision. Caption explains cutting pins to match transferred layout.
Step 6: Test fit and glue-up — diagram of careful dry fit, mallet tapping with protective scrap block, then glue application and clamping. Caption explains snug assembly and final alignment.

Include a small safety callout panel with power-tool / sharp-implement guidance where relevant: keep hands behind cutting path, secure stock with clamps or vise, wear eye protection when chiseling or sawing, cut away from fingers. Include tool icons across the infographic: backsaw, chisel, mallet, marking gauge, square, bevel gauge, pencil, marking knife, coping saw, clamps, glue brush. Background details should support woodworking only, despite the provided craft mismatch; do not depict pottery processes. Render visually for instructional search intent, but do not include any on-image text related to origami or cranes. All text MUST be written in English (array). Every heading, label, caption, legend and metric name in the image must be in English — not English. Spell each English word correctly using English characters and diacritics. Numbers stay as digits, no watermarks Anatomically correct hand positions. No tool brand logos. Safety tip for power tools / sharp implements where relevant.